M-kit V1 Quick Start Guide:
This guide will cover the physical wiring and qc testing procedure for the phoenix dma mkit.
1PC Wiring (for QC testing)
Using the provided cables or any usb 3.0+ type-c cable, plug both usb c ports into a single computer.
2PC Wiring (for normal usage)
Using the provided cables or any usb 3.0+ type-c cable, plug both the right most usb-c into your main computer and the left most into you secondary computer
Reset Button
Xim Matrix Controller Wiring
mouse emulation firmware is required for this to work*
Blue: Connect the main pc to the Xim via a USB-C cable.
Yellow: Connect your controller to the Xim.
Brown: Connect the Main port of the MKIT to the single dot side of the Xim.
Red: Connect the serial of the MKIT to the 2nd pc.
Basic Xim controller config for single input games.
Credit: l0thief (discord)
How to apply:
Xim Matrix Mouse Wiring
Credits:
mouse emulation firmware is required for this to work*
Red: Connect the main pc to the MKIT main port using the provided cable.
Green: Connect your 2nd PC to the MKIT serial port using the provided cables.
Blue: Connect the Xim matrix to your main pc via a USB-C Cable.
Pink: Connect your mouse/dongle to the single dot port on your Xim.
Basic Xim mouse config.
How to apply:
